7080棋牌app

 
新闻资讯
最新产品
公司介绍
当前位置:7080棋牌app > 公司介绍
压缩空气过滤器更换步骤及注意事项

新闻来源:杭州日丰空气处理设备有限公司    发布日期:2019.11.16

 YASUOKONGQIGUOLVQISHIYONGSHIJIANGUOZHANGHOU,HUIDAOZHINEIBUZAZHIGUODUO,YINGXIANGQITILIUSU、YALI、GUOLVXIAOGUO;SUOYIYASUOKONGQIGUOLVQIGENGHUANGONGZUOXUYAODINGQIJINXING。

 
一般更换周期为1年,如果用户使用环境比较好,可以适当久一些,如果使用环境恶劣,可能8个月左右就需要更换。
 
压缩空气过滤器滤芯更换步骤:
 
1、确认空压系统已经停止运行;
 
2、准备好合适的过滤器滤芯(规格、材质、大小、O型圈材质、型号等)、拆卸工具、收集桶、抹布等;
 
3、将需要更换的过滤器滤芯,从系统内断开。缓慢打开过滤器顶部排气口,对其进行卸压,过程中注意安全,防止物料或液体飞溅;
 
4、排空过滤器内物料,用工具打开过滤器上盖,取出过滤器滤芯,并用塑料袋将过滤器滤芯装好待报废;
 
5、用抹布将过滤器内部清洁干净;
 
7、检查O型圈是否有破损、老化等问题;
 
8、将物料的流入,按从过滤器滤芯外部流入,从滤芯内部流出的方法安装;
 
9、手握滤芯靠近O形圈的一端,垂直将滤芯插口完全插入过滤器滤芯座插孔,将过滤器滤芯插好后,然后将过滤器上盖安装好,用工具将过滤器拧紧;
 
在更换滤芯的过程中密封性和清洁是最关键的工作,所以在O型圈、螺丝、上盖等过程,要尤其细心。
If the compressed air filter is used for a long time, the internal impurities will be too much, which will affect the gas flow rate, pressure and filtration effect. So the compressed air filter replacement work needs to be carried out regularly.
 
 
 
Generally, the replacement cycle is 1 year. If the user has a good environment, it can be longer. If the environment is bad, it may take 8 months to replace.
 
 
 
Steps to replace the filter element of compressed air filter:
 
 
 
1. Confirm that the air pressure system has stopped running;
 
 
 
2. Prepare suitable filter elements (specifications, materials, sizes, o-ring materials, models, etc.), disassembly tools, collection drums, rags, etc.;
 
 
 
3. Disconnect the filter element that needs to be replaced from the system. Slowly open the exhaust port at the top of the filter and relieve pressure on it. Pay attention to safety during the process to prevent spatter of materials or liquids.
 
 
 
4. Empty the materials in the filter, open the upper cover of the filter with tools, take out the filter core, and pack the filter core with plastic bags to be scrapped;
 
 
 
5. Clean the inside of the filter with a cloth;
 
 
 
7. Check whether the o-ring is damaged or aged;
 
 
 
8. Install the material inflow according to the method of inflow from the outside of the filter element and outflow from the inside of the filter element;
 
 
 
9. Hold the filter element close to one end of the o-ring, vertically insert the filter element jack into the filter element seat jack completely. After inserting the filter element, install the upper cover of the filter and tighten the filter with tools;
 
 
 
In the process of replacing the filter element sealing and cleaning is the most critical work, so in the o-ring, screw, cover and other processes, especially careful.
 


上一篇:已经是第一篇了,要不你往下看看吧!
下一篇:什么是真空预冷机

相关推荐: